Take a look at some of our related articles below. However, if the rivet does not insert easily, you can try the slightly larger #10 drill bit. You might prefer to use a #11 drill bit first, and if you find the rivets make a good tight fit, then you can use the same for the other holes. just drill into the head of the rivet with whatever size (try 1/8' or 3/16') and when the head pops off your done. The #10 drill bit is slightly larger than the #11 drill bit. What size drill bit do I need to drill out pop rivets What size drill bit do I need to drill out pop rivets By SwornVendetta, Main Cases. īoth these sizes should give you an adequate-sized hole for inserting the 3/16 rivet. As you can see in the highlighted row, if you’re going to use a rivet with a diameter of 3/16”, you have two options:Į ither use a #10 (0.194 or 0.1935 to be exact ) drill bit or a #11 (0.191) drill bit for a 3/16 rivet. The chart above gives the recommended drill bit sizes for a range of standard rivet sizes. Once inserted, the rivet will then expand to fill the gap tightly. The diameter size for blind rivets are: Metric series 2.4, 3, 3.2, 4, 4.8, 5, 6.4 and 7.4mm. For more detail, check the rivet size chart above. That is, the drilled hole must be slightly larger than the rivet’s diameter, enough so that the rivet can slide into the hole quickly. Here you can find a quick overview of available blind rivet sizes. Key Features Drill Bit Dimension Type: Fractional Inch Drill Bit Finish: Black Oxide Item: Rivet Drill Bit,Split Pt,Black,3/16 Depth:Dia. The general rule of thumb to determine the appropriate drill bit size for a particular rivet is to allow up to six-thousandths of an inch extra in diameter (usually 4-6/1000”). Rivet diameters are expressed in 1/32 of inch increments and their lengths in 1/16 increments.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |